Configure your Cisco MX/SX/EX/C-series (webinterface)

Last Updated: Mar 22, 2016 12:43AM CET

Short version:

Paste these commands via the API (input the actual username and password before you hit "execute")

xConfiguration Provisioning LoginName: "<USERNAME>"
xConfiguration Provisioning Password: "<PASSWORD>"
xConfiguration Provisioning ExternalManager Address: provisioning.videonor.net
xConfiguration Provisioning ExternalManager Domain: provisioning.videonor.net
xConfiguration Provisioning Mode: Off
xConfiguration Provisioning Mode: VCS

 

Detailed steps:

  1. Open up your browser and input the hostname or ip-address of your endpoint
     
  2. Sign in as the admin user

     
  3. Make sure the endpoint has internet access and that DNS server(s) are configured. DNS is crucial for both provisioning and call service.
     
  4. Navigate to "Configuration -> API"

     
  5. Copy paste the below commands into the API window.

     
  6. Input the assigned username and password where it says <Username> and <Password> so that it matches the information you have gotten from Videonor. In this case it is set to "myusername" and "mypassword"

     
  7. Click Execute. You see a message indicating that the commands were successfully applied

     
  8. Verify that the provisioning is active by navigating to "Coniguration -> System status". Then select "Provisioning" from the vertical menu on the left side and check the "Status" field. It should read "Provisioned" and list the current active IP of the provisioning host. Please note that there are several provisioning hosts, so you might read a different IP address here.

     
  9. If the endpoint is unable to obtain provisioning information, please contact Videonor support by sending an email to support@videonor.com.
I find this article helpful

Can’t find what you’re looking for?

Submit a ticket
1e1a7c512745b0c3decf252da30f22d6@videonor.desk-mail.com
http://assets1.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete